Biomass Briquetting Plant in China

Biomass Briquette Press

Crushing Machines

 

For proper working of biomass briquette press and drying machine in the biomass briquetting plant, size of biomass waste is important. There are two types of crushing machine available for make suitable size sawdust or biomass grain for following drying machine and biomass briquette press in biomass briquetting plant. The choose of proper model depend on the types and size of your raw material.


(1) FSJI Wood Crusher

In the biomass briquetting plant, FSJI Wood Crusher/ pulverizer is suitable for preparing sawdust or biomass small grains for briquette press and dryer. It can crush raw wood of size less than 200mm (diameter) into size of 3-5mm (diameter).


Video:Hammer Mill with Tree Branch

 

Model

FSJ I Wood Crusher(For fresh or dried raw wood)

Wood Crusher

Capacity(kg/h)

400-500

Diameter of Feeding Material

Not more than 150-200mm

Size of crushed material

Max. Ø5×5mm

Motor

11kw

Gross/Net Weight

400/350kg

Overall Dimension (mm)

1250*700 *910

 

(2) FSJII Hammermill

In the biomass briquetting plant, FSJII Hammermill is suitable for preparing suitable size raw material for briquette press and dryer. It can mill raw material like tree branch, tree trimmings,wood chips, wood cuttings, cotton stalk, corn stalk, wheat straw etc) of size max. 50mm (diameter). After milled, the output size can reach diameter 3-5mm, that is good for working of following dryer and briquette press.


Model

FSJ II Hammermill(for wood chip/tree trimmings/wheat straw/plant stalk etc)

Hammermill

Capacity(kg/h)

500-700

Size of Feeding Material

Max. diameter 50mm

Size of milled material

Ø5×5mm

Motor

18.5kw

Gross/Net Weight

550/650kg

Overall Dimension (mm)

1700*1150*1200

Cyclone (2400*800*800)

 

 

Tag:Biomass Briquette Press,Biomass Briquetting Plant,Hammermill